Yocto thud＋Linux Kernel 4.14.0なんだけどさぁ
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.0 (hidemi@saturn) (gcc version 8.2.0 (GCC)) #9
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Machine model: ZynqMP ZCU104 RevC
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 256 MiB at 0x0000000070000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc06ff71000 s45080 r8192 d326
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 517120
[ 0.000000] Kernel command line: console=ttyPS1,115200 root=/dev/mmcblk0p2 rt
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Memory: 1784380K/2097152K available (9660K kernel code, 654K rwd)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 )
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 )
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80089f0000 ( 9664 )
[ 0.000000] .rodata : 0xffffff80089f0000 - 0xffffff8008f10000 ( 5248 )
[ 0.000000] .init : 0xffffff8008f10000 - 0xffffff8008f90000 ( 512 )
[ 0.000000] .data : 0xffffff8008f90000 - 0xffffff8009033a00 ( 655 )
[ 0.000000] .bss : 0xffffff8009033a00 - 0xffffff800924d668 ( 2152 )
[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 )
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 )
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 )
[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 )
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 )
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU event tracing is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 100.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
[ 0.000003] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 439s
[ 0.000284] Console: colour dummy device 80x25
[ 0.000300] Calibrating delay loop (skipped), value calculated using timer f)
[ 0.000308] pid_max: default: 32768 minimum: 301
[ 0.000407] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000418] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000991] ASID allocator initialised with 65536 entries
[ 0.001034] Hierarchical SRCU implementation.
[ 0.001356] EFI services will not be available.
[ 0.001387] zynqmp_plat_init Platform Management API v1.1
[ 0.001392] zynqmp_plat_init Trustzone version v1.0
[ 0.001484] smp: Bringing up secondary CPUs ...
[ 0.001730] Detected VIPT I-cache on CPU1
[ 0.001758] CPU1: Booted secondary processor [410fd034]
[ 0.002021] Detected VIPT I-cache on CPU2
[ 0.002038] CPU2: Booted secondary processor [410fd034]
[ 0.002288] Detected VIPT I-cache on CPU3
[ 0.002305] CPU3: Booted secondary processor [410fd034]
[ 0.002346] smp: Brought up 1 node, 4 CPUs
[ 0.002360] SMP: Total of 4 processors activated.
[ 0.002365] CPU features: detected feature: 32-bit EL0 Support
[ 0.002373] CPU: All CPU(s) started at EL2
[ 0.002385] alternatives: patching kernel code
[ 0.003095] devtmpfs: initialized
[ 0.007179] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
[ 0.007194] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.012106] xor: measuring software checksum speed
[ 0.052019] 8regs : 2375.000 MB/sec
[ 0.092047] 8regs_prefetch: 2052.000 MB/sec
[ 0.132076] 32regs : 2725.000 MB/sec
[ 0.172106] 32regs_prefetch: 2309.000 MB/sec
[ 0.172111] xor: using function: 32regs (2725.000 MB/sec)
[ 0.172175] pinctrl core: initialized pinctrl subsystem
[ 0.172700] NET: Registered protocol family 16
[ 0.173519] cpuidle: using governor menu
[ 0.174021] vdso: 2 pages (1 code @ ffffff80089f6000, 1 data @ ffffff8008f94)
[ 0.174031] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.174564] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.194792] zynqmp_clk_mux_get_parent() getparent failed for clock: lpd_wdt,2
[ 0.196987] zynqmp-pinctrl pinctrl: zynqmp pinctrl initialized
[ 0.197809] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
[ 0.198453] ARM CCI_400_r1 PMU driver probed
[ 0.207328] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.272340] raid6: int64x1 gen() 453 MB/s
[ 0.340325] raid6: int64x1 xor() 438 MB/s
[ 0.408391] raid6: int64x2 gen() 676 MB/s
[ 0.476389] raid6: int64x2 xor() 586 MB/s
[ 0.544401] raid6: int64x4 gen() 972 MB/s
[ 0.612465] raid6: int64x4 xor() 726 MB/s
[ 0.680530] raid6: int64x8 gen() 1158 MB/s
[ 0.748549] raid6: int64x8 xor() 753 MB/s
[ 0.816654] raid6: neonx1 gen() 737 MB/s
[ 0.884634] raid6: neonx1 xor() 853 MB/s
[ 0.952699] raid6: neonx2 gen() 1127 MB/s
[ 1.020718] raid6: neonx2 xor() 1145 MB/s
[ 1.088779] raid6: neonx4 gen() 1506 MB/s
[ 1.156806] raid6: neonx4 xor() 1395 MB/s
[ 1.224848] raid6: neonx8 gen() 1540 MB/s
[ 1.292909] raid6: neonx8 xor() 1452 MB/s
[ 1.292913] raid6: using algorithm neonx8 gen() 1540 MB/s
[ 1.292917] raid6: .... xor() 1452 MB/s, rmw enabled
[ 1.292921] raid6: using neon recovery algorithm
[ 1.293657] SCSI subsystem initialized
[ 1.293808] usbcore: registered new interface driver usbfs
[ 1.293838] usbcore: registered new interface driver hub
[ 1.293869] usbcore: registered new device driver usb
[ 1.293924] media: Linux media interface: v0.10
[ 1.293944] Linux video capture interface: v2.00
[ 1.293978] pps_core: LinuxPPS API ver. 1 registered
[ 1.293982] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
[ 1.293995] PTP clock support registered
[ 1.294017] EDAC MC: Ver: 3.0.0
[ 1.294314] zynqmp-ipi ff9905c0.mailbox: Probed ZynqMP IPI Mailbox driver.
[ 1.294428] FPGA manager framework
[ 1.294535] fpga-region fpga-full: FPGA Region probed
[ 1.294604] Advanced Linux Sound Architecture Driver Initialized.
[ 1.294859] Bluetooth: Core ver 2.22
[ 1.294884] NET: Registered protocol family 31
[ 1.294888] Bluetooth: HCI device and connection manager initialized
[ 1.294896] Bluetooth: HCI socket layer initialized
[ 1.294902] Bluetooth: L2CAP socket layer initialized
[ 1.294918] Bluetooth: SCO socket layer initialized
[ 1.295481] clocksource: Switched to clocksource arch_sys_counter
[ 1.295548] VFS: Disk quotas dquot_6.6.0
[ 1.295587] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.299522] NET: Registered protocol family 2
[ 1.299808] TCP established hash table entries: 16384 (order: 5, 131072 byte)
[ 1.299914] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 1.300120] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.300185] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.300225] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.300336] NET: Registered protocol family 1
[ 1.300515] RPC: Registered named UNIX socket transport module.
[ 1.300520] RPC: Registered udp transport module.
[ 1.300523] RPC: Registered tcp transport module.
[ 1.300527] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.300985] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[ 1.301129] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters ae
[ 1.301694] audit: initializing netlink subsys (disabled)
[ 1.302045] audit: type=2000 audit(1.292:1): state=initialized audit_enabled1
[ 1.302079] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[ 1.302740] NFS: Registering the id_resolver key type
[ 1.302755] Key type id_resolver registered
[ 1.302758] Key type id_legacy registered
[ 1.302767] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.302783] jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
[ 1.326506] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[ 1.326515] io scheduler noop registered
[ 1.326520] io scheduler deadline registered
[ 1.326536] io scheduler cfq registered (default)
[ 1.326541] io scheduler mq-deadline registered
[ 1.326545] io scheduler kyber registered
[ 1.327625] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
[ 1.352357] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.354829] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 1.360691] brd: module loaded
[ 1.364431] loop: module loaded
[ 1.365052] ahci-ceva fd0c0000.ahci: couldn't get PHY in node ahci: -517
[ 1.365187] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.366463] m25p80 spi0.0: found n25q512a, expected m25p80
[ 1.366669] m25p80 spi0.0: n25q512a (65536 Kbytes)
[ 1.366690] 4 ofpart partitions found on MTD device spi0.0
[ 1.366694] Creating 4 MTD partitions on "spi0.0":
[ 1.366702] 0x000000000000-0x000000100000 : "qspi-fsbl-uboot"
[ 1.367155] 0x000000100000-0x000000600000 : "qspi-linux"
[ 1.367646] 0x000000600000-0x000000620000 : "qspi-device-tree"
[ 1.368114] 0x000000620000-0x000000c00000 : "qspi-rootfs"
[ 1.369362] libphy: Fixed MDIO Bus: probed
[ 1.370322] tun: Universal TUN/TAP device driver, 1.6
[ 1.372022] CAN device driver interface
[ 1.374165] macb ff0e0000.ethernet: Not enabling partial store and forward
[ 1.374544] libphy: MACB_mii_bus: probed
[ 1.376164] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0)
[ 1.376173] TI DP83867 ff0e0000.ethernet-ffffffff:0c: attached PHY driver [T)
[ 1.376602] usbcore: registered new interface driver asix
[ 1.376650] usbcore: registered new interface driver ax88179_178a
[ 1.376675] usbcore: registered new interface driver cdc_ether
[ 1.376700] usbcore: registered new interface driver net1080
[ 1.376725] usbcore: registered new interface driver cdc_subset
[ 1.376751] usbcore: registered new interface driver zaurus
[ 1.376785] usbcore: registered new interface driver cdc_ncm
[ 1.377030] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM
[ 1.378565] usbcore: registered new interface driver uas
[ 1.378596] usbcore: registered new interface driver usb-storage
[ 1.379034] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rt0
[ 1.379076] i2c /dev entries driver
[ 1.379745] IR NEC protocol handler initialized
[ 1.379750] IR RC5(x/sz) protocol handler initialized
[ 1.379754] IR RC6 protocol handler initialized
[ 1.379757] IR JVC protocol handler initialized
[ 1.379760] IR Sony protocol handler initialized
[ 1.379764] IR SANYO protocol handler initialized
[ 1.379768] IR Sharp protocol handler initialized
[ 1.379771] IR MCE Keyboard/mouse protocol handler initialized
[ 1.379774] IR XMP protocol handler initialized
[ 1.380773] usbcore: registered new interface driver uvcvideo
[ 1.380777] USB Video Class driver (1.1.1)
[ 1.381185] cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer at ffffff80092s
[ 1.381416] Bluetooth: HCI UART driver ver 2.3
[ 1.381422] Bluetooth: HCI UART protocol H4 registered
[ 1.381426] Bluetooth: HCI UART protocol BCSP registered
[ 1.381449] Bluetooth: HCI UART protocol LL registered
[ 1.381453] Bluetooth: HCI UART protocol ATH3K registered
[ 1.381457] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 1.381490] Bluetooth: HCI UART protocol Intel registered
[ 1.381495] Bluetooth: HCI UART protocol QCA registered
[ 1.381529] usbcore: registered new interface driver bcm203x
[ 1.381555] usbcore: registered new interface driver bpa10x
[ 1.381583] usbcore: registered new interface driver bfusb
[ 1.381611] usbcore: registered new interface driver btusb
[ 1.381616] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[ 1.381662] usbcore: registered new interface driver ath3k
[ 1.381765] EDAC MC: ECC not enabled
[ 1.381939] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac contro)
[ 1.382750] sdhci: Secure Digital Host Controller Interface driver
[ 1.382755] sdhci: Copyright(c) Pierre Ossman
[ 1.382758] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.384006] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.384138] usbcore: registered new interface driver usbhid
[ 1.384142] usbhid: USB HID core driver
[ 1.385798] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
[ 1.386088] usbcore: registered new interface driver snd-usb-audio
[ 1.386688] pktgen: Packet Generator for packet performance testing. Version5
[ 1.386892] Netfilter messages via NETLINK v0.30.
[ 1.387005] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.387127] Initializing XFRM netlink socket
[ 1.387185] NET: Registered protocol family 10
[ 1.387645] Segment Routing with IPv6
[ 1.387687] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.387806] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.388103] NET: Registered protocol family 17
[ 1.388114] NET: Registered protocol family 15
[ 1.388129] bridge: filtering via arp/ip/ip6tables is no longer available by.
[ 1.388134] Ebtables v2.0 registered
[ 1.388210] can: controller area network core (rev 20170425 abi 9)
[ 1.388237] NET: Registered protocol family 29
[ 1.388249] can: raw protocol (rev 20170425)
[ 1.388253] can: broadcast manager protocol (rev 20170425 t)
[ 1.388260] can: netlink gateway (rev 20170425) max_hops=1
[ 1.388461] Bluetooth: RFCOMM TTY layer initialized
[ 1.388468] Bluetooth: RFCOMM socket layer initialized
[ 1.388484] Bluetooth: RFCOMM ver 1.11
[ 1.388491] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.388495] Bluetooth: BNEP filters: protocol multicast
[ 1.388501] Bluetooth: BNEP socket layer initialized
[ 1.388505] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.388512] Bluetooth: HIDP socket layer initialized
[ 1.388611] 9pnet: Installing 9P2000 support
[ 1.388625] Key type dns_resolver registered
[ 1.389032] registered taskstats version 1
[ 1.389336] Btrfs loaded, crc32c=crc32c-generic
[ 1.393886] ff000000.serial: ttyPS0 at MMIO 0xff000000 (irq = 25, base_baud s
[ 1.394490] ff010000.serial: ttyPS1 at MMIO 0xff010000 (irq = 26, base_baud s
[ 2.816972] console [ttyPS1] enabled
[ 2.821891] xilinx-psgtr fd400000.zynqmp_phy: Lane:1 type:8 protocol:4 pll_ls
[ 2.830052] PLL: shutdown
[ 2.832760] PLL: shutdown
[ 2.835749] PLL: enable
[ 2.838292] PLL: shutdown
[ 2.841862] PLL: enable
[ 2.844401] xilinx-dp-snd-codec fd4a0000.zynqmp-display:zynqmp_dp_snd_codec0d
[ 2.855062] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0: Xilinx DisplayPort Sound Pd
[ 2.863102] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1: Xilinx DisplayPort Sound Pd
[ 2.871426] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xk
[ 2.883847] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xk
[ 2.896602] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: Xd
[ 2.906770] OF: graph: no port node found in /amba/zynqmp-display@fd4a0000
[ 2.913758] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.920366] [drm] No driver support for vblank timestamp query.
[ 2.926332] xlnx-drm xlnx-drm.0: bound fd4a0000.zynqmp-display (ops 0xffffff)
[ 4.011538] [drm] Cannot find any crtc or sizes
[ 4.016231] [drm] Initialized xlnx 1.0.0 20130509 for fd4a0000.zynqmp-displa0
[ 4.024332] zynqmp-display fd4a0000.zynqmp-display: ZynqMP DisplayPort Subsyd
[ 4.033272] xilinx-psgtr fd400000.zynqmp_phy: Lane:3 type:3 protocol:2 pll_ls
[ 4.041151] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps e
[ 4.050108] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp f
[ 4.060440] scsi host0: ahci-ceva
[ 4.063941] scsi host1: ahci-ceva
[ 4.067336] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x3
[ 4.075253] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x3
[ 4.085030] xilinx-psgtr fd400000.zynqmp_phy: Lane:2 type:0 protocol:3 pll_ls
[ 4.095049] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.100541] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n1
[ 4.108391] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100
[ 4.117106] xhci-hcd xhci-hcd.0.auto: irq 31, io mem 0xfe200000
[ 4.123125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.129911] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 4.137129] usb usb1: Product: xHCI Host Controller
[ 4.141997] usb usb1: Manufacturer: Linux 4.14.0 xhci-hcd
[ 4.147387] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 4.152528] hub 1-0:1.0: USB hub found
[ 4.156289] hub 1-0:1.0: 1 port detected
[ 4.160378] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.165866] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n2
[ 4.173630] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.180410] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 4.187621] usb usb2: Product: xHCI Host Controller
[ 4.192489] usb usb2: Manufacturer: Linux 4.14.0 xhci-hcd
[ 4.197878] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 4.202983] hub 2-0:1.0: USB hub found
[ 4.206743] hub 2-0:1.0: 1 port detected
[ 4.211744] pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulatr
[ 4.221703] pca953x 0-0020: interrupt support not compiled in
[ 4.228267] at24 2-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
[ 4.234989] i2c i2c-0: Added multiplexed i2c bus 2
[ 4.239954] i2c i2c-0: Added multiplexed i2c bus 3
[ 4.244983] i2c i2c-0: Added multiplexed i2c bus 4
[ 4.250370] ina2xx 5-0040: power monitor ina226 (Rshunt = 5000 uOhm)
[ 4.256741] i2c i2c-0: Added multiplexed i2c bus 5
[ 4.261637] i2c i2c-0: Added multiplexed i2c bus 6
[ 4.266543] i2c i2c-0: Added multiplexed i2c bus 7
[ 4.271450] i2c i2c-0: Added multiplexed i2c bus 8
[ 4.276357] i2c i2c-0: Added multiplexed i2c bus 9
[ 4.281144] pca954x 0-0074: registered 8 multiplexed busses for I2C switch p8
[ 4.288730] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 17
[ 4.339494] mmc0: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMAt
[ 4.353493] rtc_zynqmp ffa60000.rtc: setting system clock to 2019-02-20 12:4)
[ 4.362361] of_cfs_init
[ 4.364825] of_cfs_init: OK
[ 4.367777] PLL: shutdown
[ 4.370390] zynqmp_pll_disable() clock disable failed for dpll_int, ret = -13
[ 4.378469] ALSA device list:
[ 4.381425] #0: DisplayPort monitor
[ 4.385307] tty_init_dev: ttyPS driver does not set tty->port. This will cra!
[ 4.395500] ------------[ cut here ]------------
[ 4.397664] ata1: SATA link down (SStatus 0 SControl 330)
[ 4.397687] ata2: SATA link down (SStatus 0 SControl 330)
[ 4.410871] WARNING: CPU: 1 PID: 1 at drivers/tty/tty_io.c:1323 tty_init_dev0
[ 4.418943] Modules linked in:
[ 4.421984] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.0 #1
[ 4.427892] Hardware name: ZynqMP ZCU104 RevC (DT)
[ 4.432666] task: ffffffc06d846d00 task.stack: ffffff8008038000
[ 4.438570] PC is at tty_init_dev+0x16c/0x1b0
[ 4.442910] LR is at tty_init_dev+0x16c/0x1b0
[ 4.447249] pc : [<ffffff80084b7dd4>] lr : [<ffffff80084b7dd4>] pstate: 60005
[ 4.454626] sp : ffffff800803ba90
[ 4.457925] x29: ffffff800803ba90 x28: ffffff8008fc3230
[ 4.463219] x27: ffffff8008a7ccf0 x26: 0000000000020002
[ 4.468514] x25: ffffffc06d424470 x24: ffffff8008a7c9c8
[ 4.473809] x23: 00000000014000c0 x22: 0000000000000000
[ 4.479104] x21: 0000000000000001 x20: ffffff8008a7cce0
[ 4.484399] x19: ffffffc06cc57c00 x18: 0000000000000000
[ 4.489693] x17: 0000000000008000 x16: ffffffbefe9fcffc
[ 4.494988] x15: 0000000000000010 x14: 6b20656874206873
[ 4.500283] x13: 617263206c6c6977 x12: 2073696854202e74
[ 4.505578] x11: 726f703e2d797474 x10: 2074657320746f6e
[ 4.510873] x9 : 2073656f64207265 x8 : ffffff80084e25c0
[ 4.516167] x7 : 616c206c656e7265 x6 : 000000000000014f
[ 4.521462] x5 : 0000000000000007 x4 : 0000000000000000
[ 4.526757] x3 : 0000000000000000 x2 : ffffffffffffffff
[ 4.532052] x1 : ffffff8008fac5e8 x0 : 0000000000000064
[ 4.537347] Call trace:
[ 4.539779] Exception stack(0xffffff800803b950 to 0xffffff800803ba90)
[ 4.546202] b940: 0000000000000064 ffffff88
[ 4.554014] b960: ffffffffffffffff 0000000000000000 0000000000000000 00000007
[ 4.561826] b980: 000000000000014f 616c206c656e7265 ffffff80084e25c0 20736565
[ 4.569638] b9a0: 2074657320746f6e 726f703e2d797474 2073696854202e74 61726327
[ 4.577450] b9c0: 6b20656874206873 0000000000000010 ffffffbefe9fcffc 00000000
[ 4.585262] b9e0: 0000000000000000 ffffffc06cc57c00 ffffff8008a7cce0 00000001
[ 4.593074] ba00: 0000000000000000 00000000014000c0 ffffff8008a7c9c8 ffffffc0
[ 4.600886] ba20: 0000000000020002 ffffff8008a7ccf0 ffffff8008fc3230 ffffff80
[ 4.608698] ba40: ffffff80084b7dd4 ffffff800803ba90 ffffff80084b7dd4 00000005
[ 4.616510] ba60: ffffff8008c2bca8 ffffffc06cc57d10 ffffffffffffffff 00000001
[ 4.624321] ba80: ffffff800803ba90 ffffff80084b7dd4
[ 4.629183] [<ffffff80084b7dd4>] tty_init_dev+0x16c/0x1b0
[ 4.634565] [<ffffff80084b817c>] tty_open+0x364/0x450
[ 4.639601] [<ffffff8008195328>] chrdev_open+0x98/0x1b8
[ 4.644816] [<ffffff800818cf6c>] do_dentry_open.isra.2+0x11c/0x2e8
[ 4.650979] [<ffffff800818dfec>] vfs_open+0x44/0x78
[ 4.655840] [<ffffff800819f37c>] path_openat+0x32c/0x1118
[ 4.661222] [<ffffff80081a13d8>] do_filp_open+0x60/0xc0
[ 4.666429] [<ffffff800818e404>] do_sys_open+0x164/0x1f8
[ 4.671723] [<ffffff800818e4b4>] SyS_open+0x1c/0x28
[ 4.676586] [<ffffff8008f10ca8>] kernel_init_freeable+0x154/0x1bc
[ 4.682670] [<ffffff80089e0e90>] kernel_init+0x10/0xf8
[ 4.687792] [<ffffff80080849c0>] ret_from_fork+0x10/0x18
[ 4.693092] ---[ end trace 2002b9a60d559c5f ]---
[ 4.697716] Unable to handle kernel NULL pointer dereference at virtual addr0
[ 4.705796] Mem abort info:
[ 4.708583] Exception class = DABT (current EL), IL = 32 bits
[ 4.714493] SET = 0, FnV = 0
[ 4.717541] EA = 0, S1PTW = 0
[ 4.720672] Data abort info:
[ 4.723546] ISV = 0, ISS = 0x00000045
[ 4.727369] CM = 0, WnR = 1
[ 4.730325] [0000000000000090] user address but active_mm is swapper
[ 4.736671] Internal error: Oops: 96000045 [#1] SMP
[ 4.741535] Modules linked in:
[ 4.744575] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.14.0 #1
[ 4.751690] Hardware name: ZynqMP ZCU104 RevC (DT)
[ 4.756465] task: ffffffc06d846d00 task.stack: ffffff8008038000
[ 4.762369] PC is at tty_init_dev+0x80/0x1b0
[ 4.766622] LR is at tty_init_dev+0x16c/0x1b0
[ 4.770961] pc : [<ffffff80084b7ce8>] lr : [<ffffff80084b7dd4>] pstate: 60005
[ 4.778338] sp : ffffff800803ba90
[ 4.781636] x29: ffffff800803ba90 x28: ffffff8008fc3230
[ 4.786931] x27: ffffff8008a7ccf0 x26: 0000000000020002
[ 4.792226] x25: ffffffc06d424470 x24: ffffff8008a7c9c8
[ 4.797521] x23: 00000000014000c0 x22: 0000000000000000
[ 4.802816] x21: 0000000000000001 x20: ffffff8008a7cce0
[ 4.808110] x19: ffffffc06cc57c00 x18: 0000000000000000
[ 4.813405] x17: 0000000000008000 x16: ffffffbefe9fcffc
[ 4.818700] x15: 0000000000000010 x14: 6b20656874206873
[ 4.823995] x13: 617263206c6c6977 x12: 2073696854202e74
[ 4.829290] x11: 726f703e2d797474 x10: 2074657320746f6e
[ 4.834584] x9 : 2073656f64207265 x8 : ffffff80084e25c0
[ 4.839879] x7 : 616c206c656e7265 x6 : 000000000000014f
[ 4.845174] x5 : 0000000000000007 x4 : 0000000000000000
[ 4.850469] x3 : 0000000000000000 x2 : ffffffffffffffff
[ 4.855764] x1 : ffffff8008fac5e8 x0 : 0000000000000000
[ 4.861059] Process swapper/0 (pid: 1, stack limit = 0xffffff8008038000)
[ 4.867742] Call trace:
[ 4.870173] Exception stack(0xffffff800803b950 to 0xffffff800803ba90)
[ 4.876597] b940: 0000000000000000 ffffff88
[ 4.884410] b960: ffffffffffffffff 0000000000000000 0000000000000000 00000007
[ 4.892222] b980: 000000000000014f 616c206c656e7265 ffffff80084e25c0 20736565
[ 4.900034] b9a0: 2074657320746f6e 726f703e2d797474 2073696854202e74 61726327
[ 4.907846] b9c0: 6b20656874206873 0000000000000010 ffffffbefe9fcffc 00000000
[ 4.915658] b9e0: 0000000000000000 ffffffc06cc57c00 ffffff8008a7cce0 00000001
[ 4.923470] ba00: 0000000000000000 00000000014000c0 ffffff8008a7c9c8 ffffffc0
[ 4.931282] ba20: 0000000000020002 ffffff8008a7ccf0 ffffff8008fc3230 ffffff80
[ 4.939094] ba40: ffffff80084b7dd4 ffffff800803ba90 ffffff80084b7ce8 00000005
[ 4.946906] ba60: ffffff8008c2bca8 ffffffc06cc57d10 ffffffffffffffff 00000001
[ 4.954717] ba80: ffffff800803ba90 ffffff80084b7ce8
[ 4.959579] [<ffffff80084b7ce8>] tty_init_dev+0x80/0x1b0
[ 4.964873] [<ffffff80084b817c>] tty_open+0x364/0x450
[ 4.969909] [<ffffff8008195328>] chrdev_open+0x98/0x1b8
[ 4.975116] [<ffffff800818cf6c>] do_dentry_open.isra.2+0x11c/0x2e8
[ 4.981278] [<ffffff800818dfec>] vfs_open+0x44/0x78
[ 4.986140] [<ffffff800819f37c>] path_openat+0x32c/0x1118
[ 4.991521] [<ffffff80081a13d8>] do_filp_open+0x60/0xc0
[ 4.996729] [<ffffff800818e404>] do_sys_open+0x164/0x1f8
[ 5.002023] [<ffffff800818e4b4>] SyS_open+0x1c/0x28
[ 5.006885] [<ffffff8008f10ca8>] kernel_init_freeable+0x154/0x1bc
[ 5.012961] [<ffffff80089e0e90>] kernel_init+0x10/0xf8
[ 5.018082] [<ffffff80080849c0>] ret_from_fork+0x10/0x18
[ 5.023378] Code: 2a0003f6 37f80656 f9415e60 b40003c0 (f9004813)
[ 5.029452] ---[ end trace 2002b9a60d559c60 ]---
[ 5.034076] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0b
[ 5.034076]
[ 5.043193] SMP: stopping secondary CPUs
[ 5.047136] Kernel Offset: disabled
[ 5.050613] CPU features: 0x002004
[ 5.053997] Memory Limit: none
[ 5.057038] ---[ end Kernel panic - not syncing: Attempted to kill init! exib
[ 5.057038] 気になるのは次の２つ。
[ 2.906770] OF: graph: no port node found in /amba/zynqmp-display@fd4a0000 [ 4.385307] tty_init_dev: ttyPS driver does not set tty->port. This will cra!前者はDisplayのことなので後回しで良いが、後者がログインプロンプトがでない原因だと思う。
Tweet write: 2019/06/12/ 00:49:47